*The Design of Retirement Calculators, and Some of the Design Trade-offs that Affect the Accuracy of Their Projections*

This is a detailed, top-down technical article on retirement calculators. It has been prepared by the designer of the Pralana Retirement Calculator but it is written objectively and will not get into the subjective business of suggesting “the best retirement calculators”. Armed with the knowledge presented in this article, you will be equipped to assess for yourself the goodness of a retirement calculator and the extent to which it can be trusted to provide accurate and/or useful information, and then determine which one (s) might be “best” for YOU.

**Retirement Calculators 101 (The formula for creating a prognosis)**

Retirement calculators are about one fundamental thing: they create a long term prognosis of your financial health based on certain assumptions and then allow you to change some or all of those assumptions to observe the effects on that prognosis. Here, in the simplest mathematical form possible, is the formula for creating that prognosis:

Long term prognosis = initial savings + growth of savings + deposits to savings – withdrawals from savings, projected out over your lifetime. The terms of this formula are defined as follows:

- Initial savings is the amount of money currently in your accounts.
- Growth of savings is the interest and dividends earned on your accounts and the growth (or loss) on the investments you’ve made with your money.
- Deposits to savings are the new money that will be added into your accounts in the future, including the liquidation of real property.
- Withdrawals from savings are the money taken out of your accounts to cover negative cash flows whenever your expenses exceed your income.
- Projections are the year-by-year additions to and subtractions from your savings for some number of years to create the long term prognosis.

**Retirement Calculators 102 (Defining the terms comprised by the prognosis formula)**

Growth of savings is often referred to as “rate of return” and is always expressed as a percentage. This percentage is then used to determine how the value of the savings accounts change each year, independent of any new contributions or withdrawals. For example, if the growth is 5%, then the size of the account at the end of year 2 will be 105% of what it was at the end of year 1 (ignoring the effects of inflation).

Your income, which is indirectly affected by inflation, includes wages, salaries, pensions, Social Security benefits, annuity payments, contributions made on your behalf by others (such as company-matching on your 401k contributions), windfalls such as inheritances, life insurance, or the selling of your home. Your expenses, which are usually directly affected by inflation, are every dime you spend, including payroll deductions, taxes, down payments on new property, house payments and utility bills, car payments and maintenance, gasoline, healthcare, college educations, food, clothes, vacations and so on. The difference between your income and your expenses determines whether you’re making deposits to or withdrawals from savings. Let’s call this difference ΔIE (delta IE, where delta refers to difference, I refers to income and E refers to expenses). When ΔIE is positive, you have a net deposit in the amount of ΔIE; when ΔIE is negative, you have a net withdrawal in the amount of ΔIE.

To create the projection of your savings, the retirement calculator simply has to do the following:

- adjust the savings balance each year by multiplying the final balance of the previous year by the expected growth percentage in the subsequent year
- make annual adjustments to both income and expenses to account for inflation and other time-related changes
- determine ΔIE and add it to the growth-adjusted savings balance (note: adding a negative number is, in effect, subtracting)
- repeat the above steps for every year of your life expectancy

**Retirement Calculators 201 (Growth of Savings)**

For the sake of this discussion, let’s say that savings accounts come in the following forms:

- checking or savings accounts that may generate some amount of interest which is taxed as regular income
- investment accounts may grow or decline over time depending upon how the underlying investments perform and the growth is taxed as capital gains when withdrawals are made
- tax-deferred retirement accounts (which may grow or decline over time depending on how the underlying investments perform), such as 401k’s and traditional IRA’s, which are funded with pre-tax money and are untaxed until withdrawals are made, and then taxed as regular income
- tax-free accounts (which may grow or decline over time depending on how the underlying investments perform), such as Roth IRA’s, which are funded with after-tax funds and whose growth is never taxed

There are some issues that arise when trying to model these savings accounts in a retirement calculator:

- How does a user specify savings account growth? Is it done separately for each of the major categories of accounts as suggested above, or is an average across all accounts used? Is the same growth rate used every year, or is it somehow nuanced over time to reflect changing investment mixes? Does the user have direct control over the annual growth rate, or does the calculator ask the user to characterize the type of investments involved and then use historic average rates of return?
- Is some mechanism employed in an attempt to simulate the year-to-year variations always experienced in real world investing?
- How are taxes handled on the simple interest generated by these accounts and on the capital gains realized whenever withdrawals are made? How are taxes handled when withdrawals are made from tax-deferred accounts? What about the handling of Required Minimum Distributions and penalties on early withdrawals?

The answers to the above questions have a direct bearing on the complexity of the calculator and on the complexity of the calculations the user has to perform just to make reasonable inputs to the calculator. All of this will be addressed further in the next article.

**Retirement Calculators 202 (Calculating ΔIE)**

Calculating ΔIE, which is income minus expenses, is a simple thing once annual income and annual expenses are known; however, defining income and expenses involves some complexities and this is where we can find significant differences in the approaches used by the designers of retirement calculators.

As previously stated, your income includes wages, salaries, pensions, Social Security benefits, annuity payments, contributions made on your behalf by others (such as company-matching on your 401k contributions), windfalls such as inheritances, life insurance, or the selling of your home. One way or another, every retirement calculator must collect information from the user related to the various income streams and create an “income profile” that projects the user’s income into the future, including annual adjustments as appropriate.

As also previously stated, your expenses are every dime you spend, including payroll deductions, taxes, down payments on new property, house payments, healthcare, and college educations. One way or another, every retirement calculator must collect information from the user related to the various expense streams and create an “expense profile” that projects the user’s expenses into the future, including annual inflationary adjustments as appropriate.

Expense streams and, to a lesser extent, income streams, tend to be more complex during the accumulation phase than in the distribution phase because they include things like fixed rate mortgages which eventually get paid off, child-rearing/education expenses which taper off as the kids leave the nest, and company matching on contributions to 401k’s. To avoid this complexity, a common design choice is to treat the accumulation phase differently than the distribution phase. In this case, the calculator will not create income or expense streams during the accumulation phase and will instead simply ask the user to tell it ΔIE, (i.e., savings contributions during your working years). Armed with this number, all the calculator has to do is adjust it for inflation (or not) and add it to the growth-adjusted savings balance each year throughout the accumulation phase to create that portion of the calculator’s long term projection. Because the central focus of most of these tools is the retirement (or distribution) phase rather than accumulation phase, the vast majority of retirement calculators use this approach.

Moving ahead into the distribution phase, all retirement calculators actually perform the ΔIE calculation and use the user’s income- and expense-related inputs in doing so; however, there are large variations in the approaches used by retirement calculators in collecting these inputs. Approaches for collecting income vary from asking the user to specify Social Security and pension income to allowing the user to define multiple income streams for both husband and wife, including part-time employment or self-employment, Social Security, multiple pensions, annuities and windfalls. Approaches for collecting expenses range from asking the user to specify a single number representing total expenses for all time (commonly specified as a percentage of pre-retirement income) to specifying the details of a large variety of expense streams with variations over time, such as property, child-rearing, healthcare and discretionary expenses.

**Retirement Calculators 203 (Taxes)**

A complicating factor intentionally omitted from the discussion on calculating ΔIE is **taxes**, specifically income and FICA taxes. Taxes are an expense, but there is no standard way for treating taxes in the world of retirement calculators. Here are some of the approaches in use:

- Ignore them (often with some corresponding text to try to persuade the user that taxes don’t really matter)
- Ask the user to specify a tax rate and use that to simulate the effect of taxes on income and savings growth (some allow separate tax rates for income and savings growth), which naturally requires the user to determine and enter the correct tax rate(s).
- Ask the user to specify a tax rate that applies to withdrawals from savings while asking that same user to specify net (post tax) income rather than gross income. This also requires the user to determine and enter the correct tax rate and, further, to use that value to manually convert gross income to net income prior to entering it into the calculator.
- Perform detailed tax calculations and ask nothing of the user

**This disparity in the handling of taxes is one of the reasons why you can observe very different results from various calculators to seemingly the same input data. The next article will clearly explain why the different approaches yield different outputs and quantitatively address the sensitivity of long term projections to errors in tax calculations.**

**Retirement Calculators 204 (Keeping track of your savings)**

As a quick review, we’ve now discussed the growth of savings and the calculation of deposits to and withdrawals from savings, including the effects of taxes. Let’s now turn our attention to keeping track of your savings as it grows or declines and as we make deposits and withdrawals.

If the calculator treats all savings as one common pool and simply doesn’t try to model the unique characteristics of separate types of savings, then all it has to do is add annual ΔIE to the old balance to get the new balance. A subset of these calculators recognize that withdrawals from savings can be a taxable event and apply a tax burden on all withdrawals based on the user-supplied tax rate.

The calculators that manage the various savings accounts separately must deal with considerably more complexity than those that model savings as a single pool of money. In these calculators, a positive ΔIE is probably treated as a deposit to regular savings but when ΔIE is negative these calculators must determine which account to take the withdrawal from. The order in which withdrawals are taken across the various savings types may or may not be under the user’s control. A common approach would be to take it from regular savings first and when that’s depleted, then go to either tax-deferred or tax-free accounts to cover the deficit. In any case, the calculator must establish the order in which withdrawals are to be taken whenever negative cash flow (negative ΔIE) situations occur and it must work its way from one account to the other whenever the withdrawals result in the depletion of one or more of the accounts (possibly when negative ΔIE is large and prolonged over several years). When this process results in withdrawals from tax-deferred savings, this is a taxable event which in turn affects expenses. When this process results in withdrawals from regular savings, this __may be__ a taxable event with an attendant effect on expenses. It depends upon whether the growth of the regular savings is taxable as simple interest/dividends (taxable annually as the growth occurs) or taxable as long term capital gains (taxable only when withdrawals are made and then only on the growth and not on the principle). Some calculators have the capability to fully model this while others always assume growth is to be treated as simple interest.

Calculators that keep track of the balance of tax-deferred accounts typically also deal with the issue of Required Minimum Distributions (RMD’s) and automatically generate taxable withdrawals starting at age 70 or 71. These RMD’s can be treated as additional income or as additional deposits to regular savings. Regardless, the RMD’s must be accounted for in the process of keeping track of the balances of the various types of savings accounts. They matter because they’re a taxable event which has ramifications on annual expenses.

So, here’s a simple question to ponder: Presumably there are financial advantages and disadvantages to regular accounts vs. tax-deferred accounts vs. tax-free accounts and it makes a significant enough difference for us to employ different accounts in preparing for retirement; otherwise, we’d just put all our money in one account and not worry about it. Does a similar consideration come into play when it comes to modeling our savings over time in a retirement calculator? Does trying to model the complexity described above actually matter when it comes to a prognosis of your financial future? Think about it and we’ll come back to it in Retirement Calculators 304.

**Retirement Calculators 301 (Sensitivity of Long Term Projections to Simplified Accumulation Phase Modeling)**

**This discussion is moot if you’re already retired or quickly approaching retirement. Otherwise, it might be pertinent to you. The reason it matters is that ****the accuracy of your portfolio estimate at the start of your retirement is a function of how accurately your accumulation phase is modeled. Inaccuracies in this estimate will then be magnified over the distribution period because of the law of compounded returns.**

To be clear on the terminology, the accumulation phase generally refers to your pre-retirement years when you’re building your savings and the distribution phase generally refers to your retirement years when you’re making withdrawals from your savings to cover retirement expenses. Regarding the modeling of these phases, retirement calculators tend to fall into one of two categories:

- Those that model both the accumulation and distribution phases by deriving ΔIE from income and expenses profiles.
- Those that model the accumulation phase based on asking the user for ΔIE (savings contributions); virtually all free retirement calculators fall into this category.

To get specific about potential difficulties in determining a single value representing ΔIE, here are a few examples of expenses that are likely to occur during the accumulation period which can make it difficult to come up with a good average annual contribution amount:

- Car payments come and go unless you buy a new car every few years
- The cost of raising and educating your children will eventually taper off
- Your mortgage will eventually get paid off

You may be thinking that inputting ΔIE directly is ideal because that allows you to set up the calculator to be consistent with your real-world payroll deductions for contributions to savings. There are two major issues with this:

- For long term projections while you’ve still got quite a few years in the accumulation phase, it doesn’t address the variations caused by the examples stated above.
- Payroll deductions are effectively “expenses”, even if the money goes into one savings account or another and the rest of your income goes into, say, your checking account. If there’s money left over after paying all your other expenses, that will be just more “new savings” even if it’s not literally in the account you consider your savings account. Conversely, whenever the expenses you cover with your checking account exceed the balance of that account, withdrawals from your savings account always have to be made to avoid bouncing checks. So, regardless of how the details fall out on a paycheck cycle, it is always, always true that income minus expenses equals new savings. Whenever expenses exceed income, new savings becomes a negative number and, in effect, a withdrawal.

Clearly, then, errors will be introduced into a calculator’s prognosis whenever it asks the user to specify the average savings contributions per year and if, over time, that number isn’t consistent with the expected difference between income and expenses. Check out the table below to get a feel for the effect of this type of error. It shows how errors in savings contributions to taxable savings during a 15-year accumulation period would be magnified during retirement periods of 20 and 30 years, including the effects of taxes.

So, an input error of only $1000 per year for 15 years will lead to a 4% error in the portfolio’s ending value after a 30-year retirement, but an input error averaging $5000 for a 15-year accumulation period will lead to a 20% error after a 30-year retirement.

In the final analysis, this may or may not matter to you depending upon your circumstances and what you want to achieve with the retirement calculator. It doesn’t matter at all if you’re already retired or are nearing retirement. It probably won’t matter too much if you’ve adopted a repetitive approximation approach for evaluating retirement readiness wherein you take a quick look once in a while with your latest numbers. **It may matter a lot if you’ve still got a long way to go to retirement and are using the calculator to assist you in evaluating the long term financial impacts of multiple lifestyle alternatives.**

**Retirement Calculators 302 (Determining Retirement Income Requirements)**

**As a quick refresher, we’ve defined the term ΔIE to be the difference between income and expenses and have stated that a positive value represents a positive cash flow and net deposits to savings while a negative value represents a negative cash flow and net withdrawals from savings. Some retirement calculators use the term “retirement income requirements”, but what they’re really talking about are your expenses in the distribution phase. **

Regardless of the terminology used to refer to expenses, this is another area where we can differentiate low fidelity from high fidelity calculators. Many calculators only allow expenses to be defined by a single summary-level value while others allow for expenses to be defined to whatever level of detail the user desires. Some of the latter category of calculators go so far as to model college educations, home mortgages and other property-related expenses, healthcare expenses that vary greatly from early to late retirement, one-time expenses, and so on. Clearly, the first group of calculators belongs to the low fidelity category while the second group meets at least one important criterion for a high fidelity calculator.

There are rules of thumb suggesting that retirement income requirements (i.e, expenses during your retirement years) should be assumed to be a particular percentage of your pre-retirement income, and many retirement calculators ask for your input in those terms. The author of this article considers that to be complete nonsense and will not propagate any such numbers here. Unless you’ve continually raised your standard of living to keep up with your income throughout your working years, your expenses in retirement will not necessarily be a high percentage of your income at the time you retire. The fact is that the only way to know what your retirement-era expenses are going to be is to figure it out, then review and update it from time to time. As a starting point, you can look at your current expenses and determine which of them you’ll still have after you retire and for how long, and quantify them in terms of today’s dollars. If you plan to downsize your home, write that down along with the related details. If you plan to take up new activities, maybe you need to add an expense item or two.

With that said, there are really two fundamental ways of going about this:

- Use pencil and paper or an electronic spreadsheet to identify and quantify all of your expenses and then translate the details into a summary value to feed into a retirement calculator which will then apply inflationary adjustments while calculating year-by-year ΔIE.
- Use a retirement calculator that facilitates the entire process. Retirement planning is a long term, repetitive endeavor and a calculator that helps the user itemize, quantify and set the timing for a multitude of expenses while remembering that information from one planning session to the next can be invaluable.

**Retirement Calculators 303 (Sensitivity of Long Term Projections to the Tax Handling Approach)**

**You may be of the opinion that it’s a waste of time to attempt to model taxes because we don’t know what Uncle Sam is going to do to tax rates in the future. I believe the correct approach is to use the best information available (i.e., the current tax code) to establish a baseline plan, supplement that with a sensitivity analysis based on potential future tax increases, and then revisit your analysis from time to time to make updates based on any new information that has become available. **

With that said, retirement calculators generally fall into one of three tax-handling categories: 1) those that perform detailed tax calculations, 2) those that account for taxes based on user-specified tax rates and 3) those that ignore taxes. If you go with one of those that perform detailed tax calculations, you simply do not have to concern yourself with taxes and can be reasonably confident that they’re being accounted for accurately. If you go with one of those that estimate taxes based on user-specified tax rates, then **you have to accurately determine the proper tax rate to use and how it might vary over time and enter that into the tool, knowing that most tools only accept a single rate that applies to the entire modeling period. Finally, with the set of tools that ignores taxes altogether, you can either choose to ignore taxes yourself, or you can figure your tax rate and then manually adjust your income and expense inputs to the tool to account for taxes.**

The first set of tools (those that perform detailed tax calculations) requires you to do no tax-related math yourself. The next set requires you to determine your income tax rate and/or your investment tax rate for your working years, early and late retirement years and then, for most calculators, boil them down to a single average value. The last set requires you to do everything the second set does in addition to using that value to adjust all of your income and expense values. So, not only do **you have to do more work in the second and third cases, but there’s also increased risk of error**.

Going back to the subject of performing a **sensitivity analysis on tax rates, some calculators make this easier and less error prone than others and fall into one of two categories: 1) those that allow you to specify tax rate changes at specific times in the future and 2) those that use the same tax rate across the whole modeling period or ignore taxes altogether. If you use one of the latter set, you will have less control over your analysis and will have to do more work yourself. **In the Calculator Evaluation article on this website, four of the five tools in the High Fidelity set perform detailed tax calculations AND allow you to specify future tax rate increases (amount and date), as well as decreases in Social Security benefits. The fifth tool (Flexible Retirement Planner) doesn’t do detailed tax calculations but it does allow you to specify both income and investment tax rates (and Social Security benefits) on a year by year basis if you so choose.

Ignoring ease-of-use issues and user-induced errors, I decided to do some testing to try to quantify the affect different tax-handling approaches might have on calculator outputs. To get the absolute best apples-to-apples test I could, I used just one calculator (Flexible Retirement Planner - FRP) and then modeled taxes using three different approaches for the distribution period (all approaches were identical for the accumulation period): Approach 1) with several periods of different tax rates, with rates as measured by the Pralana Retirement Calculator (PRC) which performs detailed tax calculations, Approach 2) with a constant tax rate, using the average measured by PRC and Approach 3) with tax rate set to zero and income and expenses adjusted to compensate for taxes, again using the average tax rate as measured by PRC. Using only test case 1 defined in the Calculator Evaluation article (60 year-old couple beginning a 40-year retirement with $1,100,000 and $24,000 of Social Security income starting at age 66) and with all other parameters exactly the same for each tax-handling approach being evaluated, here are the final savings balances (in today’s $) I observed:

- Approach 1: $392,972 (the best answer because of the most accurate modeling of taxes))
- Approach 2: $403,572 (3% higher than the best answer)
- Approach 3: $334,641 (15% lower than the best answer)

Observation #1: there was only a 3% error introduced by using a constant tax rate rather than a nuanced tax rate.

Observation #2: if you manually compensate for taxes by adjusting income and expenses, the errors are worsened if there are periods where you actually pay no taxes, such as the first several years of Case 1 where all expenses are covered by withdrawals from taxable savings. So, in this case, expenses are exaggerated by modeling taxes which may not actually have to be paid.

Observation #3: Even though the exact same average tax rate was used for approaches 2 and 3, substantial differences in the final savings balances were projected. There are two reasons for this:

- FRP maintains separate balances for taxable, tax-deferred and tax-free accounts. If withdrawals are required to cover current expenses, FRP takes first from taxable accounts and understands that NO TAXES have to be paid until taxable savings are depleted after which it then (and only then) has to dip into tax-deferred savings. So, if you tell FRP your tax rate and let it handle the tax burden, it will operate in this manner. If, on the other hand, you tell it the tax rate is zero and manually adjust income and expenses to compensate for taxes, FRP will have no choice but to take enough withdrawals to cover the specified expenses. Therefore, approach 2 collects fewer taxes than approach 3 and ends with a substantially higher savings balance (correctly so).
- FRP models Required Minimum Distributions (RMD’s) and applies the specified tax burden to those distributions. For test case 1, RMD’s plus other income exceeds expenses, thus creating positive cash flow and, therefore, no other withdrawals from tax-deferred savings beyond the RMD’s. In approach 2, only the RMD’s are taxed, while approach 3 effectively taxes 100% of the expenses regardless of the withdrawal amount required to cover them. In the end, this results in significantly lower taxes and, therefore, higher final balances, for approach 2 vs. approach 3 (correctly so).

I repeated this tax analysis using Case 2 (involving both accumulation and distribution periods) and got similar results and for the same reasons:

- Approach 1: $315,015 (the best answer)
- Approach 2: $315,240 (virtually identical to the best answer)
- Approach 3: $241,105 (23% lower than best answer)

Conclusions:

**Manually compensating for taxes by adjusting income and expenses adds very significant distortion to final balances**- For the simple test cases I used, it doesn’t make much difference in the final outcome if you use a flat tax rate or a profiled tax rate in the distribution period

Finally, I decided to do one more test. Conclusion #2 above says it doesn’t make much difference whether you use a flat tax rate or a more nuanced one; however, it doesn’t say anything about user-induced errors in the specification of those flat tax rates. So, for this test, I again used FRP and the test case 1 scenario, but with three different tax rates: 8%, 9% and 10%. Final savings balances were as follows:

- 8% tax rate: $381,836
- 9% tax rate: $351,286 (an 8% difference based on a 1% change in tax rate)
- 10% tax rate: $321,223 (a 16% difference based on a 2% change in tax rate)

Conclusion: Absolute precision in specification of your tax rate is not crucial; however, just making a rough estimate will probably result in substantial errors. For this test case, it appears that **each 1% error in tax rate results in an 8% error in the final savings balance. This error is avoidable by using a calculator that performs detailed tax calculations.**

**Retirement Calculators 304 (Sensitivity of Long Term Projections to Pooled vs. Separate Savings Accounts)**

**Previously, a question was posed on whether it makes a significant difference whether a retirement calculator models savings accounts separately according to their unique characteristics or simply models them as a common pool. The test case described below, involving only the distribution phase, is enlightening. In this case, there’s $1,000,000 in savings at the start of a 30-year retirement that begins at age 65, and retirement expenses are about twice the retirement income such that withdrawals from savings will be made throughout the retirement years. The exercise here is to study the differences in the final savings balance with respect to variations in how the $1M is split between tax-deferred, Roth and taxable savings accounts, and the extent to which the growth of taxable savings is due to simple interest or capital gains (which affects its taxation). This test was performed using the Pralana Retirement Calculator (Gold version) which performs detailed federal income tax calculations with no tax rate inputs from the user. The rate of return is the same on all accounts. Taxable account balances go above zero despite a zero initial balance due to RMD’s. The details are presented in the table below, in today’s dollars. **

We can readily conclude from this data that there are significant differences in final account balances depending on whether the calculator models separate savings accounts or simply treats them as a common pool. We can see up to 19% variation depending simply upon whether the growth of regular savings is simple interest or capital gains (see the case where the $1M is split between tax-deferred and taxable savings at the start of retirement). Additionally, we can see up to 18% variation depending upon how the money is split between the various accounts at the start of retirement even with no variation in whether the growth of regular savings is simple interest or capital gains.

**In real world investing, we choose to put money in different types of accounts because it really does matter, and these findings indicate that it matters in the world of modeling as well.**

**Retirement Calculators 305 (Ease of Use Issues)**

Most free retirement calculators are truly easy to use once you’ve done your homework and have translated all of your financial details into the form they’re expecting. This commonly boils down to annual contributions to savings, annual income during your retirement years and when it will begin, your retirement income requirements (i.e., retirement expenses), tax rate, rate of return on savings, inflation rate and life expectancy. Armed with these numbers, it’s usually a simple matter to plug them into the calculator and get quick results.

Retirement calculators do the math that integrates the data described above into a long term projection. That’s difficult for most people to do on their own and, hence, retirement calculators can be useful tools. The rest of the story, though, is the downside of the statement “once you’ve done your homework and have translated all of your financial details into the form they’re expecting”. Let’s briefly consider some of the inputs required:

- Annual contributions to savings: This has already been addressed in Retirement Calculators 301.
- Annual income during your retirement years: The user needs to be aware of what the calculator is looking for because some want gross income and some want net income. Gross income is easy, but figuring net income involves knowledge of the taxability of each element of the income, calculating the income taxes and the FICA tax, and then subtracting that from the gross income. The taxability of Social Security benefits varies dramatically depending upon the total income of the recipient.
- Retirement income requirements (expenses in retirement): This has already been addressed in Retirement Calculators 302.
- Tax rate: The user needs to be sensitive to what the calculator is looking for because most want effective tax rate but some want your marginal tax rate. Calculating your effective tax rate involves determining an aggregate rate for federal and state income taxes and FICA taxes, and if the calculator allows only a single rate for the rest of your life then you must figure out a long term weighted average on that rate. Remember that your rate will change when those RMD’s kick in at age 70 or 71.
- Rates of return: If the calculator manages all savings as a single pool then the user must figure a long term weighted average across regular, tax-deferred and tax-free categories.

In contrast to the above, some high-end retirement calculators provide much more robust data input capabilities that allow you to characterize your financial situation in rich detail while eliminating the need for you to do most or all of the “off-line” math required by the low-end calculators. This actually makes your job quite a bit easier and it reduces the opportunities for math errors; however, to be completely fair and depending upon the calculator, more robust data input capabilities makes for a more complicated user interface and creates opportunities for misinterpretation of the inputs being requested by the calculator. This, then, accentuates the need for a quality user manual to accompany any complex calculator.

** ****Retirement Calculators 306 (Analysis Methods)**

One or more of the following analysis methods are employed by all retirement calculators to produce their outputs:

- Fixed rate projection: Predicts an outcome based on average inflation and rate of return across the whole modeling period (or two or more multi-year periods). This is the most common analysis method and is particularly useful for quick looks at long term prognoses, making comparisons between lifestyle choices and for performing sensitivity analyses; however, it fails to account for market volatility and, so, can be misleading in terms of predicting the long term growth of your portfolio.
- Monte Carlo simulation: Attempts to model market volatility effects with randomly-generated rates of return in conjunction with statistically significant quantities of independent scenarios to predict a range of outcomes. Presentation of this range of outcomes is useful in helping you see how well and how poorly your portfolio might perform over the long term; however, Monte Carlo simulations have at least one significant weakness: actual market volatility isn’t really random.
- Historic simulation: Attempts to model inflation and market volatility effects with historic inflation and rates of return to predict a range of possible outcomes. Presentation of this range of outcomes is useful in helping you see how well and how poorly your portfolio might perform over the long term; however, historic simulations have at least one significant weakness: the future will not be the same as the past.
- Hybrid of Historic and Monte Carlo Simulation: Attempts to model inflation and market volatility effects with a large quantity of randomly-selected sequences of historic inflation and rates of return to predict a range of possible outcomes. Presentation of this range of outcomes is useful in helping you see how well and how poorly your portfolio might perform over the long term. I presume hybrid simulations are an attempt to achieve the best of Monte Carlo and historic simulation while avoiding their respective weaknesses, but cannot comment on the effectiveness of this approach.

Each of these analysis methods offer some goodness but none of them is perfect. Therefore, the more information you can gather and the more different methods you can employ to examine your financial future, the better equipped you’ll be for making decisions.

**Retirement Calculators 307 (Unknowns and Risks)**

No calculator can forecast the future with certainty because the calculations are always based on assumptions related to certain variables that are unknowable in advance, and **this translates into some degree of risk in relying on their predictions**.

Topping the list of unknowns are:

- Inflation rate
- Future performance of your investments
- Your lifespan
- Government policy changes

The primary risk areas are then:

- Higher-than-expected inflation, particularly when coupled with a fixed income
- An unfortunate sequence of returns or poorer-than-expected performance from your investments
- Outliving your money or the early death of your spouse
- Higher taxes and lower benefits

There’s little you can do about any of these unknowns, but it can be useful to understand where the associated risks lie and how sensitive your financial plan is to variations in key variables. That’s where a trustworthy retirement calculator can help:

- Conduct a sensitivity analysis on the key variables: Experiment with different values of inflation, rates of return, tax rates, and lifespan and see what effect this has on your long term projections
- Perform both Monte Carlo and history-based analyses on your plan to see the likely range of potential long term outcomes to different sequences of returns on your investments and dynamic inflation rates
- Explore various survivor scenarios to see how the surviving spouse might fare in the event of the early demise of his or her partner

**Retirement Calculators 401 (Life Cycle Models)**

We’re all affected by things beyond our control, such as inflation, government policy (e.g., tax rates, Social Security benefits), the rising cost of healthcare and the volatility of certain investments. But we also face many decisions in life which are largely under our control. We weigh the pros and cons, make trade-offs, and try to assess how one decision interacts with other decisions. This includes job and career, getting married, having children, college educations for your children, housing choices, mortgages, how much to contribute to retirement accounts and what type of retirement accounts to have, healthcare, how much life insurance to carry, getting a divorce, when, where and how to retire, when to start collecting Social Security benefits, which survivor benefits to select with your defined benefits pension, long-term care, and on and on. The decisions we make on many of the above items have a direct bearing on our income stream and our taxes which, in turn, affect our discretionary spending power.

Then there are choices we have to make on discretionary spending such as vacations and travel, hobbies and entertainment, clothes, cars, luxury items, gifts and charitable giving. And, of course, there are also those non-discretionary expenses such as utilities, food and household items.

Without the right tools, putting all the pieces of the financial puzzle of our lives together is bewildering if not impossible. There may be other definitions of the term “life cycle calculator”, but I’m defining it to mean one that can model all of these types of things simultaneously and specifically including the modeling of various survivor scenarios. Further, a good life cycle calculator should also help the user establish an optimized standard of living. **Suffice it to say that you will not get one of these in a free, on-line retirement calculator; however, you may find that these tools are worth every penny invested in them. **

**Retirement Calculators 402 (Consumption Smoothing)**

Consumption smoothing is a term used by economists to describe a consistent standard of living for an individual regardless of family size and the ebb and flow of non-discretionary expenses. In other words, it enables you to maintain the same level of discretionary spending (i.e., consumption) while you’re raising a family, paying your mortgage, paying for college educations, when you become empty nesters and when you’re retired. For reference, consumption smoothing is the subject of an excellent and easy-to-read book by Laurence Kotlikoff and Scott Burns entitled __Spend ‘til the End.__ Consumption smoothing is mathematically complex and computationally intensive and is an extremely rare feature in retirement calculators. **Three of the calculators in the High Fidelity group identified in the Calculator Evaluation article on this website provide a consumption smoothing capability: ESPlanner, ESPlanner/Basic and the Pralana Retirement Calculator/Gold. None of the calculators in the Low Fidelity group do consumption smoothing.**

These tools can be very helpful in making lifestyle decisions, but you have to be careful in determining the level of **trust ****to place on consumption-smoothed expenses. It’s one thing to get the calculations right, which isn’t easy, but it’s another thing to be able to count on them. Why? Because they’re subject to the same “unknowables” as all other projections: inflation, rates of return, life span, and so on. To reduce this risk, Kotlikoff and Burns suggest telling ESPlanner that you and your spouse plan to live to age 100. The Pralana Retirement Calculator takes risk reduction options to another level: it allows the user to specify different (presumably more conservative) rates** of return, inflation and life expectancy assumptions for the consumption smoothing calculations than are used for its fixed rate and Monte Carlo projections. Further, the latest version has the capability to utilize Monte Carlo and historical simulations in conjunction with consumption smoothing to calculate a standard of living with a 90% probability that your money will outlast you.

**Retirement Calculators 403 (Personal Finance Models)**

So, finally, I’m going to introduce the concept of a personal finance model (PFM) and then attempt to explain the power and convenience that such a tool can provide. A PFM should not be confused with personal finance software because those products tend to be money management and tax preparation tools. **A PFM should be like a trusted friend that you can go to with virtually any issue, **and here are some key phrases I’d associate with a good PFM:

- Easy to get along with, open and accessible
- Convenient
- Trustworthy
- Robust
- Flexible
- Produces realistic responses that are readily understood

If the tool makes sense to you, is sufficiently transparent that you can understand what it’s doing, is sufficiently flexible and robust to be able to model the nuances of your financial life, and you can understand and have confidence in what it’s telling you, then you have a tool that can become a trusted friend. Regular use of a well-designed tool will lead to familiarity, and that will lead to ease of use, convenience and even more confidence. Once you get to that point you’ll no longer have to “play the field”, trying to model your scenarios in various tools and trying to understand and normalize the differing outputs. Then you can get very quick turn-around on evaluating alternatives and what-ifs, and periodically updating your assumptions and reviewing long term projections for any warning signs. The tool will be there for you anytime you need it, and you’ll be comfortable with the process.

So, now let’s get specific about the characteristics of a good PFM. **We’re really talking about way-high-end retirement calculators **that meet the following requirements:

- Saves your data from one work session to another and enables you to reengage with virtually no start-up overhead
- Models the accumulation and distribution phases with equal fidelity
- Performs detailed tax calculations to avoid approximation errors and requirements for you to perform off-line mathematics
- Models tax-deferred, tax-free and taxable accounts separately to avoid the errors described in Retirement Calculators 304; for tax purposes, models the growth of taxable accounts as either simple interest (taxable each year) or as capital gains (taxable upon withdrawal) based on user input
- Derives rates of return and standard deviations for tax-deferred, tax-free and taxable accounts from the underlying asset classes and asset allocations associated with each of these accounts rather than simplified single-value estimates
- Enables you to define income and expense streams in as little or as much detail as desired, and facilitates the process of itemizing, organizing and maintaining the details
- Uses at least two and preferably three different analysis methods to project a range of outcomes based on the user-specified assumptions
- Enables you to start from an existing baseline plan and model alternatives or evaluate what-if’s in a matter of minutes or even seconds, and provides an effective mechanism for comparing alternatives
- Has a simple process for taking updates from the supplier without any requirements for you to manually re-enter data
- Comes with detailed user guidance and high quality support from the supplier with an efficient mechanism for user data to be shared with the supplier for the purpose of problem investigation
- Runs on multiple platforms with an easy process for sharing data between the platforms to enable a user to work on or refer to the data at home, at work or while traveling, or to enable sharing of data between financial planners and clients

Pralana Consulting LLC, Plano, TX

© 2017 Pralana Consulting. All Rights Reserved.

*PRALANA RETIREMENT CALCULATOR | The Mercedes-Benz of Retirement Calculators*

New Visitor? Start Here.

**ADVANCED PERSONAL FINANCIAL MODELING | MONTE CARLO & HISTORICAL ANALYSIS | INTERACTIVE WHAT-IF ANALYSIS**